Thrustmaster Reflex 3D USB driver download free (ver. 1.­0)

Note: these instructions are for Windows 98 or Windows 95 with DirectX 8.­0 or higher.­ The exact steps may vary depending on OS version and other installed software.­ 1- Plug the Reflex 3D into a free USB port.­ Windows will detect the Reflex 3D and bring up the new hardware wizard.­ Launch the installation package to install the driver.­ Go to the Control Panel and select Game Controllers.­ 2- Click on Properties and select Calibrate.­ You only need to calibrate it once after reconnection.­ Leave the stick centered and press any button on the stick once.­ Move the stick around several times.­ Leave it centered again and press the same button twice.­ Move the base mounted throttle up and down several times and press the button once again.­ Now rotate the stick's handle (twist motion) left and right and press a button.­ Push the POV HAT UP,­ enough for the stick to follow forward,­ hold it there and press ENTER.­ Repeat this procedure for RIGHT,­ DOWN and LEFT.­ Click FINISH.­ 3- You can select the TEST TAB to verify that the calibration was done properly and that all functions of the stick respond.­ Click APPLY.­ NOTE: For Windows 2000 and Windows XP,­ the joystick will be recognize as a "HID compliant Game Device".­ The drivers provided by Microsoft will ensure you a perfect compatibility with any games using DirectX technology (100%­ of today's games!).­